Pediatric Pulse Oximeter Choice MD300C5 is a portable non-invasive device for spot checking oxygen saturation (SpO2) and pulse rate at home and hospital (including clinical use in internist/surgery, anesthesia, intensive care and etc). It comes with a case and a protective skin.

The children fingertip pulse oximeter has been approved by FDA (USA), PMDA (Japan) and CMDCAS (Canada).

MD300C5 pediatric digital pulse oximeter is designed for children weighing 33-100 lb or 15-45 kg. MD300C5 uses a special pediatric oxymetry sensor calibrated specially for children¹. It helps to minimize inaccurate measurements due to movement. The probe also has a smaller opening to better fit children's fingers. MD300C5 is one of the best pulse oximeters for children.

The digital display can show data in six different modes making it easy for the patient and caretaker to read. This is especially helpful when the patient has problem with hand or arm movement.

The digital pediatric pulse oximeter combines advanced technology with a stylish, wearable design. Featured with a large bright blue LED display which allows you read in the dark and severe weather condition, MD300C5 fingertip pulse oximeter provides accurate readings - oxygen saturation, pulse rate along with pleth waveform.

Pediatric pulse oximeter MD300C5 has outstanding interference resistance against ambient light and can make a wide-range of accurate measurements even in low perfusion. This fingertip pediatric pulse oximeter is one of the best oximeters in the world. Deviations are less than ±1% where comparing readings taken in indoor natural lighting against those taken in a dark room.

Buy a pediatric oximeter today and we will include a FREE case to protect your pulse oximeter. This offer will last until our supply runs out.

For more information, please see our Pediatric Pulse Oximeter MD300C5 Support Section.

Features

• Certifications: FDA(USA), PMDA(Japan), CMDCAS(Canada), CE
• Specially design for children¹ with simple and easy operation
• Small & lightweight design (total 25g without batteries)
• Dual color OLED display with 10 levels of brightness
• Display SpO2,pulse rate, bar Graph, SpO2 waveform
• Six display modes
• Low power consumption, automatically power off
• Low power indicator
• 2 AAA Alkaline or rechargeable batteries

Technical specifications:

• Display mode: Dual color OLED
• SpO2:
• Measurement range: 70-99%
• Accuracy: @80%-99%, ±2%; @70%-79%, ±3%
• Resolution: ±1%
• Pulse rate
• Measurement range: 30-235 BPM
• Accuracy: 30-100: ±2 BPM; 101-235: ±2%
• Resolution: ±1 BPM
• Operation time: 30 hours under normal conditions
• Automatic power-off
• Low power indicator

¹ For patients with small fingers, it is important to position the fingernail right under the LED light and to keep the finger still during the measurement.