Choice Medical MD300C3 - Product Specifications

Choice Medical MD300C3 Fingertip Pulse Oximeter - Technical Specifications

1. Display Type: LCD display
2. SPO2:
• Measurement range:70-99%
• Accuracy: ±2% on the stage of 80%-99%; ±3% on the stage of 70%-80%;
3. Pulse Rate:
• Measure range:30-235 BPM
• Accuracy: ±2 BPM or ±2% larger
• Pulse Intensity: Bargraph Indicator
4. Power Requirements:
• Two AAA alkaline Batteries
• Power consumption: Less than 40mA
• Low power indication:
• Battery Life: Two AAA 1.5V, 600mAh alkaline batteries could be continuously operated as long as 30 hours.
5. Dimension:
• Length: 60mm
• Width: 34mm
• Height: 30mm
• Weight: 50g (including two AAA batteries)
6. Environment Requirements:
• Operation Temperature: 5-40°C
• Storage Temperature: -10-40°C
• Ambient Humidity: 15%-80% in operation, 10%-80% in storage
7. Declaration: EMC of this product comply with IEC60601-1-1-2 standard.
8. Measurement Performance in Low Perfusion Condition: required the test equipment (BIO-TEK INDEX Pulse Oximeter tester) the pulse wave is available without failure when the simulation pulse wave amplitude is at 6%.
9. Interference Resistance Capacity against Ambient Light: Device work normally when mixed noise produced by BIO-TEK INDEX Pulse Oximeter tester
10. Pulse signal strength indicator
11. PR tone modulation function
12. Adjustable brightness