Directory: Knowledge Base | Pulse Oximeter | Pulse Oximeter Product Support |

Choice Medical MD300C310 - Product Specifications

Choice Medical MD300C310 Fingertip Pulse Oximeter - Specifications

Technical Specifications:

1. Display Type: OLED display
2. SPO2:
• Measurement range:70-99%
• Accuracy: ±2% on the stage of 80%-99%; ±3% on the stage of 70%-79%;
3. Pulse Rate:
• Measure range:30-235 BPM
• Accuracy: 30 ~ 100BPM ±2 or 101 ~ 235BMP±2%
4. Power Requirements:
• Two AAA alkaline Batteries
• Power consumption: Less than 30mA
• Low power indication:
• Battery Life: Two AAA 1.5V, 800mAh alkaline batteries could be continuously operated as long as 30 hours.
5. Dimension:
• Length: 55mm
• Width: 32mm
• Height: 28mm
• Weight: 30g (including two AAA batteries)
6. Environment Requirements:
• Operation Temperature: 5-40°C
• Storage Temperature: -10-40°C
• Ambient Humidity: 15%-80% in operation, 10%-80% in storage
7. Declaration: EMC of this product comply with IEC60601-1-1-2 standard.
8. Measurement Performance in Low Perfusion Condition: required the test equipment (BIO-TEK INDEX Pulse Oximeter tester) the pulse wave is available without failure when the simulation pulse wave amplitude is at 6%.
9. Interference Resistance Capacity against Ambient Light: Device work normally when mixed noise produced by BIO-TEK INDEX Pulse Oximeter tester
10. True color OLED display
11. Pulse signal strength indicator
12. PR tone modulation function
13. Adjustable brightness