HOME | COMPANY | PRODUCTS | CONTACT US | 281.664.1209 / 281.664.1214

Directory: Home | Knowledge Base | Pulse Oximeters | Pulse Oximeter Product Support |

 

Oxywatch Pulse Oximeter MD300C63 - Installation

Choice Medical MD300C63 Fingertip Pulse Oximeter - Installation

Battery Installation

  1. Put the two AAA batteries into battery cassette with correct polarities.
  2. Press the button and push the battery cover horizontally along the arrow shown as below:

MD300C63 install battery

Notes: Battery polarities must be correctly installed. Otherwise, damage might be caused to device.

Please put or remove batteries in right order, or likely to damage the device bracket.

Please remove the battery if the Oximeter will not be used for long time.

Hang Lace Installation

  1. Thread thinner end of the hang lace through the hanging hole.
  2. Thread thicker and of the lace through the threaded end before pulling it tightly.

<< BACK

Related Articles...

Choice Pulse Oximeter OxyWatch MD300C63 Reference

HOME | COMPANY | PRODUCTS | CONTACT US | 281.664.1209 / 281.664.1214  

Secure Payments

Proven Solutions. Fast Shipping. Fantastic Support.

Copyright © 2011 by Amperor, Inc., Houston, TX

AmperorDirect.com is a trademark of Amperor, Inc.